Newsletter November 2018

We are still going strong! A small update for our loyal followers.

Progress of the development of our system

Important objectives in designing our AirGravityMill were that it:

  • Would be possible to assemble it with two workers
  • Would not cause pollution or nuisance in its environment
  • Should be safe, easy and quick to maintain
  • Had to be able to reliably supply electricity 24/7.
  • Should be possible to switch it on and off in a controlled manner.

These goals seem to have been achieved!

The recent months we spent a lot of time on further optimizing the basic system, and on developing the design for a mobile ‘Energy island’ that should be able to be installed at any location.

Two versions of this mobile ‘Energy Island’ have been designed: A 1 and a 2 MW version. Both can produce electricity 24/7 for immediate use.

  • The 1 MW version requires a floor of approximately 6 by 6.3 meters and consists of two mills.
  • The 2 MW version consists of three mills on a floor of approximately 6 by 10 meters.

The objective is to deliver prefab systems in segments on location where the customer can have a distribution cabinet with offtake points of 2000 and 4000 Ampere.

Progress of our company

With the introduction of new products (including storage batteries), the possibilities that new technologies offer us and new services that are provided to us, the foundation of our company has been strengthened in recent months. We have created a sound basis for the roll-out of our beautiful systems.

In the coming months we will to work out the details of the production method of our systems. Then we can start preparing and starting production.

Newsletter June 2018

Much to our joy, Beautiful Energy (Mooie Energie) receives a lot of attention! The interest is particularly high from abroad. In the coming year, however, we will only deploy our systems in our own region and the Netherlands. Nonetheless there are talks with foreign parties and investors to set up production facilities abroad in a few years’ time.

But of course our priority now lies in the construction of our first large systems. We are reasonably well on schedule. R & D and management have decided to give simplification and possible efficiency improvements priority over the construction speed. Certain parts are made especially for us by third parties and sometimes during construction we find that replacing existing parts by improved ones is just the smart thing to do.

Continue reading “Newsletter June 2018”

First picture!

A first! By popular request we publish the first picture of our system. You can see an air gravity mill of 3,500 kilos under construction. We call this part the “hinge block”. Check back soon for more!

Energy is a master resource

In today’s competitive environment of production and technology moving forward faster than in the last 100 years, it is of essence to have reliable sources of energy to facilitate a sustainable demand.

Recent peaks in crude oil derivatives have shown rising prices for transport and cost of manufacturing, therefore reducing company profits and increasing consumer prices, throwing economies and purchase power out of scale.

Energy is the most vital resource that we depend on, from home use to manufacturing. Among the increase in demand for energy we are challenged mainly by governing bodies to produce energy in an environmentally friendly and sustainable way, so called “renewable energy”. Continue reading “Energy is a master resource”

How does it work?

We understand that the news about our AirGravityMill raises a lot of questions. You will understand that we are careful when providing information about our intellectual property. Nevertheless we will try to answer the most important question.

Question: How is it possible that, with just a minimal amount of external energy, the mill can drive a secondary system with 100% gravity?

Answer: The AirGravityMill is equipped with at least two “MDS” systems, one per mass. The working masses in the mill are set in motion with a small amount of external energy, activating the MDS systems. The ‘law of conservation of energy’ will make sure that approximately the same amount of energy remains in the mill for the next rotation. But the motion of the wheel and thus activation of the MDS systems has additional consequences that do not take energy from the rotation. Continue reading “How does it work?”

Newsletter January 2018

Finally: A revolution in renewable energy!


Back in 1996 we got interested in the process of transforming the energy/power of gravity on objects into kinetic energy, ultimately resulting in a continuously driving force.
Patiently and motivated we continued working on the solution for more than 10 years, despite all external opposition and negativity (always blindly referring to the laws of conservation of energy).
More than 750 days ago we had a major breakthrough with a new invention. And last month we achieved our goal: We can transform gravity into a driving force; 100% kinetic energy, generated from the quadratic acceleration of weights in our “AirGravityMill”, driving a generator. Continue reading “Newsletter January 2018”

Welcome to ‘Beautiful Energy’

On our new site we will provide you with the latest publicly available information regarding our revolutionary energy system.

For the time being there is no contact form because answering the flood of questions from all over the world has become an impossible task. Please check back soon for the latest news.